Eco-STONE BRICK
“EcoStoneBrick” is a prototype designed under the 2.04 STONE – SusTainable ecOdesign project reusiNg quarring wastE. It is a cement-based building brick in which a part of the binder is made up of stone filler: a secondary product of the stone processing. It does not include the cooking phase, therefore energy consumption and related emissions are reduced.
Considering the prototype characteristic of the product, some entries have been compiled on the basis of scenarios compatible with the declared life and use of the product.
Durability and reliability of the product or its components as expressed through the product’s guaranteed lifetime: ⭐⭐⭐⭐
Ease of repair and maintenance: ⭐⭐⭐
Efficiency in terms of upgrading, reuse, remanufacturing and refurbishment and recycling: ⭐⭐⭐⭐
Use of substances, and in particular the use of substances of concern: ⭐⭐⭐⭐
Use or consumption of energy, water and other resources in one or more life cycle stages of the product: ⭐⭐⭐
Use or content of recycled materials and recovery of materials, including sustainable renewable materials: ⭐⭐
Weight and volume of the product and its packaging, and the product-to-packaging ratio: ⭐⭐⭐⭐
Incorporation of used components: N.A.
Quantity, characteristics and availability of consumables needed for proper use and maintenance: N.A.
The environmental footprint of the product expressed as a quantification of a product’s life cycle environmental impacts: N.A.
Give from Production Operators
Product identification CODE-TYPE and LOT/SERIES Number: EcoStoneBrick
Product Description: Masonry Brick
Contact details of the manufacturer: N.A.
Contact point details in the Member State where the product is available: N.A.
Take by Stakeholders from Operative and Circularity Phase
No data available.
Give from Production Operators
Product Description: Masonry brick
Manufacturer / Authorised Representative data: N.A.
Technical Evaluation Body: N.A.
Notified bodies / TAB (if applicable): N.A.
Validation Certificates References: N.A.
Technical Reference Documents: N.A.
Declared Performance: DoP Document
Product Requirements: Mechanical strength: DM 17/01/2018 (NTC 2018); Thermal performance: DL 311/06 - UNI EN 1745 - UNI EN ISO 6946 – UNI 10351 – UNI 10355; Fire resistance: DM 16/02/2007;
Evaluation and Verification System: CE system 2+
Reference of standard: No one
Declarations on performance conformity, sustainability and requirements of the Product: Product standard: UNI EN 771/3
Take by Stakeholders from Operative and Circularity Phase
No data available.
Give from Production Operators
Product identification CODE-TYPE and LOT/SERIES Number: EcoStoneBrick
Products Category: P Element for use in protected masonry (UNI EN 771-3)
Declared Uses: In walls, columns and load-bearing partitions
Nominal Size / Classification: 24 cm x 12 cm x 6 cm
Essential Parts Of The Product: Brick
Estimated Average And Minimum Useful Life: 50 Years
Possible Variants And Descriptions: Height: 6 cm; 10 cm; 12 cm
Date And Place Of Last Uninstallation, If Any: N.A.
All necessary elements to demonstrate performance and compliance: DoP Document
Information on procedures to ensure that products meet the declared performance and compliance with the regulation: Internal quality controls and compliance procedures
Information on assessment and verification systems: CE system 2+
Information on simplified procedures: No one
Intended users: Construction operators
Conditions of use: Dry laying or with mortar (UNI EN 771-3)
Main materials used: cement (16,64%), stone filler (43,18%), sand(43,18%)
Compatibility with other materials or products: Cementitious matrix bedding mortars, plaster of all types
Electrical and electromagnetic compatibility: N.A.
Software compatibility: N.A.
Integration into systems or kits: N.A.
Data on the packaging: In Pallet
Information on the frequency of inspections: 5 Years
Information on the type of inspections: Visual inspections and eventually instrumental surveys
Primary raw materials: Sand
Secondary raw materials, if any: Stone filler
Chemical composition: Cement, stone dust, Sand, Water
Dimensions and shapes of components: 24 cm x 12 cm x 6 cm, parallelepiped
Take by Stakeholders from Operative Phase
Installation Data: dd/mm/yyyy - Identification of the construction company
Unistallation Data: Number of removed brick and operations on them (e.g. n.1 removed brick and mortar elimination)
Date of last uninstallation in use, if applicable: dd/mm/yyyy - Identification of the construction company
Reason for last uninstallation in use, if applicable: (e.g. crack bridging of the block)
Data on the product use, when possible: (e.g. in walls)
Inspection Data, if any: (e.g. Visual inspection) - Identification of the construction company
Frequency of inspections Data: Periodic controls - Identification of the construction company
Information on faults: (e.g. cracking on n. of blocks) - Identification of the construction company
Maintenance Data, if any: (e.g. n. 1 Mending; n.1 Replacement) - Identification of the construction company
Data on Maintenance Frequency: 5 Years - Identification of the construction company
Quality of compatibility Data: Good compatibility with cement matrix
Give from Production Operators
Assembly, installation and connection instructions: Dry laying; Wet laying
Drawings, diagrams and means of attachment to other products and parts of construction works: No one
Instructions for uninstallation: Dry laying: dismount; Laying with mortar: demolition
Description of adjustment and maintenance operations: Verify the integrity of the brick
Repair instructions: Recovery of the detached parts
Preventive maintenance measures to be observed: Periodic controls
Instructions for training installers or operators: N.A.
Disassembling Instruction for Mid-Life: N.A.
Instructions on methods of inspection: Visual inspections and eventually instrumental surveys
Frequency of inspections: 5 Years
Take by Stakeholders from Operative and Circularity Phase
Feedback on information clarity: All operations are listed
Give from Production Operators
Potential risks of the product: No one
Materials potential risks: No one
Any misuse reasonably foreseeable: No one
Secure storage: Suitable areas for pallet handling
Instructions for safe operation and maintenance: No one
Protective measures: No one
Information on what to do in the event of a breakdown or accident: N.A.
Training and other requirements that must be met for safe use: No specifications required
Personal protective equipment to be provided: Gloves, safety shoes, helmet
Instructions for training installers or operators: No specifications required
Take by Stakeholders from Operative and Circularity Phase
No data available.
Give from Production Operators
Repurpose Intructions: N.A.
Reuse Instructions: Remove and clear any mortars or adhesives
Recycle Instructions: Crushing by manual or mechanical means
Disassembling Instruction for End-Life: Dry laying: manual dismount of every single brick
Take by Stakeholders from Operative Phase and Circularity Phase
Data on the quality of materials reuse: N.A.
Data on the quality of components reuse: N.A.
Data on the quality of material recovery from product components: N.A.
Product breakdown data for recovery: Mending with cement mortar similar to the block composition
Feedback on ease of Reuse: Perfect for grinding and use it as filling
Feedback on ease of recycling: It require dedicate conferring
Secondary Generated Materials Data: Send to production of concrete
Give from Production Operators
Information on the performance of the product measured in terms of its climate change effects: Environmental essential characteristics table
Calculation of sustainability performance in relation to essential environmental characteristics and packaging used: N.A.
Environmental Footprint Data caused by production: N.A.
Prediction of Environmental Footprint Data caused by use: N.A.
Prediction of Environmental Footprint Data caused by Manutention: N.A.
Prediction of Environmental Footprint Data caused by transport: N.A.
Footprint caused by raw materials extraction: N.A.
Production Footprint: N.A.
Delivering Footprint: N.A.
Take by Stakeholders from Operative Phase and Circularity Phase
Data on circularity quality of materials and components: Good because It contain recovery material between 26% and 50% and it can be reused on site in the event of breackdown
Consuption Data in use stage: N.A.
Consuption Data in the recycling phase: N.A.
Consuption Data in the reuse phase: N.A.
Consuption Data in the remanufacturing phase: N.A.
Consuption Data during reconditioning: N.A.
Give from Production Operators
No data available.
Take by Stakeholders from Operative Phase and Circularity Phase
Users and operators Feedback data on various sections of DPP: N.A.
Feedback on ease of cleaning: If laid wet, is difficult to clean it from mortar residues; if laid wet, it does not require cleaning
Feedback on ease of maintenance: Good but not optimal, because it require specialized operators and traditional techniques
Feedback on ease of disassembly: Good but not optimal, because it require dry laying and manual disassembly for every single block
Feedback on ease of repair: It require just cement mortar similar to the block composition
Give from Transport Operators
No data available.
Take by Production Operators
Data on compliance with the instructions for safe storage and transport: D.Lgs. 81/2008
Potential risks of product: No one
Reasonably foreseeable misuse: No one
Measures of protection: No one
Instructions to enable safe transport, take-over and delivery: Assured load appropriately
Instruction for training of transporters (if necessary): No one
Information on what to do in the event of a breakdown or accident: No one
Give from Transport Operators
Date of acceptance: N.A.
Data on delivery: N.A.
Transport data: Make and model of the truck
Data and date of change means: No one
Data on consumption during transport: Km travelled of the roundtrip
Data on the condition of the product during transport: No One
Take by Production Operators and Prosumers
No data available.
Give from Transport Operators
Feedback on instructions for safe storage and transport: It would be useful to inhibit the loading and unloading area to other users during the operations
Feedback on product packaging for travel: It would be useful to use a plastic liner
Feedback on product take-over and delivery: No one
Take by Production Operators
No data available.
Give from Construction Workers
Information on the Construction Company: Name and contact details of the concerned company
Take by Production operators
Product identification CODE-TYPE and LOT/SERIES Number: EcoStoneBrick
Product Description: Masonry Brick
Contact details of the manufacturer: N.A.
Contact point details in the Member State where the product is available: N.A.
Give from Construction Workers
No data available.
Take by Production Operators
Product Description: Masonry brick
Manufacturer / Authorised Representative data: N.A.
Technical Evaluation Body: N.A.
Notified bodies / TAB (if applicable): N.A.
Validation Certificates References: N.A.
Technical Reference Documents: N.A.
Declared Performance: DoP Document
Product Requirements: Mechanical strength: DM 17/01/2018 (NTC 2018); Thermal performance: DL 311/06 - UNI EN 1745 - UNI EN ISO 6946 – UNI 10351 – UNI 10355; Fire resistance: DM 16/02/2007;
Evaluation and Verification System: CE system 2+
Reference of standard: No one
Declarations on performance conformity, sustainability and requirements of the Product: Product standard: UNI EN 771/3
Give from Construction Workers
Date of last uninstallation: No one
Use Stage Data: In walls
Take by Production Operators
Products Category: P Element for use in protected masonry (UNI EN 771-3)
Declared uses: In walls, columns and load-bearing partitions
Nominal size / classification: 24 cm x 12 cm x 6 cm
Essential parts of the product: Brick
Estimated average and minimum useful life: 50 Years
Possible variants and descriptions: Height: 6 cm; 10 cm; 12 cm
Date and place of last uninstallation, if any: N.A.
All necessary elements to demonstrate performance and compliance: DoP Document
Information on procedures to ensure that products meet the declared performance and compliance with the regulation: Internal quality controls and compliance procedures
Information on assessment and verification systems: CE system 2+
Conditions of use: Dry laying or with mortar (UNI EN 771-3)
Main materials used: cement (16,64%), stone filler (43,18%),sand(43,18%)
Compatibility with other materials or products: Cementitious matrix bedding mortars, plaster of all types
Electrical and electromagnetic compatibility: N.A.
Software compatibility: N.A.
Integration into systems or kits: N.A.
Give from Inserire voci
Assembly, installation and connection: Wet laying, according to the indications
Take by Production Operators
Assembly, installation and connection instructions: Dry laying; Wet laying
Drawings, diagrams and means of attachment to other products and parts of construction works: No one
Instructions for uninstallation: Dry laying: dismount; Laying with mortar: demolition
Repair instructions: Recovery of the detached parts
Preventive maintenance measures to be observed: Periodic controls
Give from Construction Workers
No data available.
Take by Production Operators
Potential risks of the product: No one
Instructions designed for safe use of the product: Information in the safety data sheet
Any misuse reasonably foreseeable: No one
Secure storage: Suitable areas for pallet handling
Instructions for safe operation and maintenance: No one
Protection measures during use: No one
Information on what to do in the event of a breakdown or accident: N.A.
Training and other requirements to be met for safe use: No specifications required
Instructions for training installers or operators: No specifications required
Instructions on protective measures for the user: Information in the safety data sheet
The personal protective equipment to be provided: Gloves, safety shoes, helmet
Give from Construction Workers
Consumption data, if possible: N.A.
Environmental footprint feedback caused by use: N.A.
Information on product reuse/recycling: (E.g. Crushing and use it as filling)
Take by Production Operators
Information on theproduct performance measured in terms of its climate change effects: Environmental essential characteristics table
Secure storage: Suitable areas for pallet handling
Remanufacture Data: N.A.
Reuse Data: Remove and clear any mortars or adhesives
Recycling Data: Crushing by manual or mechanical means
Environmental Footprint Data caused by raw materials extraction, production and delivery: N.A.
Consumption data, if possible: N.A.
Information on product recycling centres: Conferring to treatment of inert waste
Rewards for good product recycling: N.A.
Further information on reuse and recycling: No one
Give from Construction Workers
No data available.
Take by Production operators
Date of acceptance: N.A.
Data on delivery: Make and model of the truck
Data on consumption during transport: Km travelled of the roundtrip
Give from Construction Workers
User feedback on the various sections of the DPP: N.A.
Feedback oninformation clarity: All information is listed
Techical data feedback: All information and operations are listed
User feedback on circularity: The product respects the declared performance and is easy to reuse it on site
Environmental footprint feedback: N.A.
Take by N.A.
No data available.
Give from Manutentors and Specialized Operators
Information on the Maintenance Company: Name and contact details of the concerned company
Take by Production Operators
Product identification CODE-TYPE and LOT/SERIES Number: N.A.
Product Description: Masonry Brick
Contact details of the manufacturer: N.A.
Contact point details in the Member State where the product is available: N.A.
Give from Manutentors and Specialized Operators
Type and frequency of inspections (carried out): Visual and instrumetal, every 5 years
Type and frequency of maintenance (carried out): Anomalies founded by visual and instrumetal inspections
Repair data: (e.g. number of mending bricks)
Installation and uninstallation data: (e.g. number of replaced bricks, type of mortar)
Information on faults: (e.g. cracking, number of bricks)
Date of last uninstallation: dd/mm/yyyy
Professional operators feedback: No one
Maintenance feedback: No one
Take by Production Phase
Products Category: P Element for use in protected masonry (UNI EN 771-3)
Declared Uses: In walls, columns and load-bearing partitions
Nominal Size/Classification: 24 cm x 12 cm x 6 cm
Essential Parts Of The Product: Brick
Dimensions and shapes of components: 24 cm x 12 cm x 6 cm; parallelepiped
Estimated Average And Minimum Useful Life: 50 years
Possible Variants And Descriptions: Height: 6 cm; 10 cm; 12 cm
Date And Place Of Last Uninstallation, If Any: N.A.
Information on procedures to ensure that products meet the declared performance and compliance with the regulation: Internal quality controls and compliance procedures
Intended users: Building operators
Conditions of use: Dry laying or with mortar (UNI EN 771-3)
Main materials used: cement (16,64%), stone filler (43,18%),sand(43,18%)
Compatibility with other materials or products: Cementitious matrix bedding mortars, plaster of all types
Electrical and electromagnetic compatibility: N.A.
Software compatibility: N.A.
Integration into systems or kits: N.A.
Information on the frequency of inspections: Every 5 years
Information on the type of inspections: Visual and instrumetal
Maintenance for safety and durability: Periodic Controls
Wear parts and replacement criteria: N.A.
Description of adjustment and maintenance operations: Verifying the integrity of the block
Give from Manutentors and Specialized Operators
Maintenance for durability reasons: Recovery of protection
Take by Production Phase
Assembly, installation and connection instructions: Dry laying; Wet laying
Drawings, diagrams and means of attachment to other products and parts of constructions: No one
Instructions for uninstallation: Dry laying: dismount; Laying with mortar: demolition
Description of adjustment and maintenance operations: Verifying the integrity of the block
Repair instructions: Recovery of the detached parts
Preventive maintenance measures to be observed: Periodic controls
Instructions of training for installers or operators: No specifications required
Disassembling Instruction for Mid-Life: N.A.
Instructions on methods of inspection: Visual, and eventually instrumetal
Type of inspections that may occur more frequently: N.A.
Typical maintenance for durability reasons: Ensure the protection
Frequency of inspections: 5 Years
Give from Manutentors and Specialized Operators
Maintenance for safety reasons: N.A.
Take by Production Operators
Potential risks of the product: No one
Materials potential risks: No one
Any misuse reasonably foreseeable: No one
Safe storage Instructions: Suitable areas for pallet handling
Instructions for safe operation and maintenance: No one
Protection measures: No one
Information on what to do in a breakdown or accident: N.A.
Training and other requirements that must be met for safe use.: No specifications required
The personal protective equipment to be provided: Gloves, safety shoes, helmet
Instructions for training installers or operators: No specifications required
Typical maintenance for safety reasons: N.A.
Give from Manutentors and Specialized Operators
Environmental Footprint Data caused by Manutention: N.A.
Take by Production Operators
Prediction of Environmental Footprint Data caused by Manutention: N.A.
Give from Manutentors and Specialized Operators
Feedback from maintainers on the various sections of the DPP: N.A.
Feedback on the ease of cleaning, maintenance, disassembly, repair and reuse or recycling of the product and its components: Good but not optimal, because for wet laying it require manual disassembly and cleaning of every single block, but is easy to reuse on site grounded as filling
Take by N.A.
No data available.
Give from Circularity Operators
Information on operators and specialised disposal centres: Name and contact details of the concerned company
Take by Production Operators
Product identification CODE-TYPE and LOT/SERIES Number: EcoStoneBrick
Product Description: Masonry Brick
Contact details of the manufacturer: N.A.
Contact point details in the Member State where the product is available: N.A.
Give from Circularity Operators
No data available.
Take by Production Operators
Product Description: Masonry Brick
Manufacturer / Authorised Representative data: N.A.
Technical Evaluation Body: N.A.
Notified bodies / TAB (if applicable): N.A.
Validation Certificates References: N.A.
Technical Reference Documents: N.A.
Declared Performance: DoP Document
Product Requirements: Mechanical strength: DM 17/01/2018 (NTC 2018); Thermal performance: DL 311/06 - UNI EN 1745 - UNI EN ISO 6946 – UNI 10351 – UNI 10355; Fire resistance: DM 16/02/2007;
Evaluation and Verification System: CE system 2+
Reference of standard: No one
Declarations on performance conformity, sustainability and requirements of the Product: Product standard: UNI EN 771/3
Give from Circularity Operators
Secondary generated material data (Data from recycling process): (E.g. Number of blocks ground for reuse)
Data on circularity quality of materials and components: (E.g. Need more cleaning of blocks of mortar residues
Techical Data (reuse, repurpose and recycle data): (E.g. Number of bricks ground and ordered into production of concrete or ground for use it as filling)
Take by Product Operators
Category of products: P Element for use in protected masonry (UNI EN 771-3)
Declared uses: In walls, columns and load-bearing partitions
Nominal size / classification: 24 cm x 12 cm x 6 cm
Essential parts of the product: Brick
Estimated average and minimum useful life: 50 Years
Possible variants and descriptions: Height: 6 cm; 10 cm; 12 cm
Date and place of last uninstallation, if any: dd/mm/yyyy
All elements to demonstrate performance and compliance: DoP Document
Information on procedures to ensure that products meet the declared performance and compliance with the regulation: Internal quality controls and compliance procedures
Main materials used: cement (16,64%), stone filler (43,18%), sand(43,18%)
Primary raw materials: Sand
Secondary generated material data, if any (Data from the used product): Stone filler
Chemical composition: Cement, stone dust, Sand, Water
Dimensions and shapes of components: 24 cm x 12 cm x 6 cm, parallelepiped
Materials Risks: No one
Compatibility with other materials or products: Cementitious matrix bedding mortars, plaster of all types
Electrical and electromagnetic compatibility: N.A.
Software compatibility: N.A.
Compatibility and integration in systems or kits: N.A.
Give from Circularity Operators
Examples of product reuse/recycling: (E.g. Used as filling; material for concret production)
Take by Production Operators
Assembly, installation and connection instructions: Dry laying; Wet laying
Instructions for disassembly: Dry laying: manual dismount of every single brick
Drawings, diagrams and means of disassembly from other products and parts of construction works: No one
Measures of protection: No one
Training instructions for recycling operators: D.Lgs. 81/2008
Information on what to do in the event of an accident: No one
Give from Circularity Operators
No data available.
Take by Production operators
Potential risks of the product: No one
Any misuse reasonably foreseeable: No one
Safe deposit box: In pallet, in suitable areas for pallet handling
Instructions for safe operation and maintenance: No one
Protection measures: No one
Give from Circularity Operators
Information about incentives for recycling: At the discretion of the municipality
Remanufacture: (E.g. type of grinding for the number of blocks ordered into production of concrete)
Reconditioning: N.A.
Reuse: (E.g. operations on the blocks to remove and clear any mortars or adhesives)
Recycling: N.A.
Take by Production Operators
Remanufacture: Sent to production of concrete
Reconditioning: N.A.
Reuse: Remove and clear any mortars or adhesives
Recycling: Crushing by manual or mechanical means
Give from Circularity Operators
Environmental Footprint data (caused by recycling process): N.A.
Take by Production operators
Information on the performance of the product measured in terms of its climate change effects: Environmental essential characteristics table
Calculation of sustainability performance in relation to essential environmental characteristics and packaging used: N.A.
Give from Circularity Operators
Circularity Operators feedback on the various sections of the DPP: N.A.
Disassembling End-Life data feedback: All operations are listed and clear
End life process data feedback: All information are clear
Reuse, repurpose and recycle Feedback: Adequate for waste recycling as declared
Take by Operative phase
Environmental footprint data feedback from users: N.A.
Descrizione: Il pacchetto di Eco-STONE BRICK contiene il modello informativo del prodotto con integrazione DPP realizzata in ArchiCAD 28 e scambio in IFC2x3. Le proprietà del passaporto sono strutturate in Pset_DPP_ e riportano, ove presente, la fonte del dato e lo stakeholder responsabile (GIVE/TAKE). La classificazione di prodotto “Eco-STONE BRICK” è stata aggiunta nel Gestore Classificazioni per ancorare semanticamente il profilo informativo al componente
Contenuti: PLN (ArchiCAD 28) - DPP_EcoStoneBrick_AC-BIM.pln | TPL (ArchiCAD 28 Template) - DPP_EcoStoneBrick_AC-BIM-Template.tpl | IFC (IFC2x3) - DPP_EcoStoneBrick_AC-BIM.ifc
Requisiti: ArchiCAD 28 per PLN/TPL | viewer IFC compatibile per IFC2x3
Template BIM/IFC: DPP_EcoStoneBrick_BIMIFCTPL.zip