BIOPICDoor
BIOPICDoor is characterized by high sustainability and upgradeability. The structural part is designed to guarantee longevity and stability over time, while the front surface, most subject to wear, is ensured by the autonomous replacement of a customizable panel. The latter performs both an aesthetic and protective function, and is combined with the load-bearing panel through reversible gluing, based on sustainable and safe materials. This solution allows maintaining structural functionality and easily renewing the appearance of the door, without complex interventions.
Considering the prototype characteristic of the product, some entries have been compiled on the basis of scenarios compatible with the declared life and use of the product.
Durability and reliability of the product or its components as expressed through the product’s guaranteed lifetime: ⭐⭐⭐⭐
Ease of repair and maintenance: ⭐⭐⭐⭐
Efficiency in terms of upgrading, reuse, remanufacturing and refurbishment and recycling: ⭐⭐⭐⭐
Use of substances, and in particular the use of substances of concern: ⭐⭐⭐⭐
Use or consumption of energy, water and other resources in one or more life cycle stages of the product: ⭐⭐⭐⭐
Use or content of recycled materials and recovery of materials, including sustainable renewable materials: ⭐⭐⭐⭐
Weight and volume of the product and its packaging, and the product-to-packaging ratio: ⭐⭐⭐
Incorporation of used components: ⭐⭐⭐
Quantity, characteristics and availability of consumables needed for proper use and maintenance: ⭐⭐⭐⭐
The environmental footprint of the product expressed as a quantification of a product’s life cycle environmental impacts: N.A.
Give from Production Operators
Product identification CODE-TYPE and LOT/SERIES Number: BIOPIC
Product Description: kitchen door
Contact details of the manufacturer: N.A.
Contact point details in the Member State where the product is available: N.A.
Take by Stakeholders from Operative and Circularity Phase
No data available.
Give from Production Operators
Product Description: Kitchen door
Manufacturer / Authorised Representative data: N.A.
Technical Evaluation Body: N.A.
Notified bodies / TAB (if applicable): N.A.
Validation Certificates References: N.A.
Technical Reference Documents: N.A.
Declared Performance: EU Declaration of conformity document
Product Requirements: UNI EN 1116:2018 for standard dimensions; Standard E1 (EN 717-1 / EN ISO 12460-3): Establishes the emission limits of formaldehyde from panels used for kitchen doors, setting a maximum level of 0.1 ppm
Evaluation and Verification System: No one for this product
Reference of standard: No one
Declarations on performance conformity, sustainability and requirements of the Product: EU Declaration of conformity document
Take by Stakeholders from Operative and Circularity Phase
No data available.
Give from Production Operators
Product identification CODE-TYPE and LOT/SERIES Number: BIOPIC
Products Category: N.A.
Declared Uses: Kitchen door
Nominal Size / Classification: Classification of elements: base multilayer; reversible glue; interchangeable cover
Essential Parts Of The Product: Base panel; glue; cover
Estimated Average And Minimum Useful Life: 20 Years
Possible Variants And Descriptions: Variants for the base: solid wood; chipboard; MDF;
Date And Place Of Last Uninstallation, If Any: No
All necessary elements to demonstrate performance and compliance: EU Declaration of conformity document o No one?
Information on procedures to ensure that products meet the declared performance and compliance with the regulation: Internal quality controls and compliance procedures (E.g. Uni 9001 or other internal standardized certifications or production procedures to specify)
Information on assessment and verification systems: No one for this product
Information on simplified procedures: No one
Intended users: Kitchen assemblers / non-specialized users
Conditions of use: Humidity and Temperature: For wooden furniture, keep ambient humidity between 40% and 70% and temperatures between 10°C and 35°C to prevent crack formation. Resistance to Agents: The doors must not have water stagnation and require the use of neutral detergents for cleaning, avoiding aggressive products such as acetone and trichlorethylene.
Main materials used: Wood, PETG, water-based rabbit skin glue; gel disks
Compatibility with other materials or products: Metallic elements
Electrical and electromagnetic compatibility: N.A.
Software compatibility: N.A.
Integration into systems or kits: Yes, the whole product constitutes a kit
Data on the packaging: Cardboard packaging; bubble wrap; EPS
Information on the frequency of inspections: N.A.
Information on the type of inspections: Visual inspections
Primary raw materials: Primary raw material in possible variants for the base: solid wood, plywood
Secondary raw materials, if any: Secondary raw material in possible variants for the base: MDF, chipboard
Chemical composition: For the base: solid wood, plywood, MDF, chipboard; rabbit skin water-based glue; disks: hydrogels consisting of collagen gelatin, food grade transglutaminase, glycerol and water; front finish: Polyethylene Terephthalate Glycolate (PETG)
Dimensions and shapes of components: Various dimensions; parallelepiped shape
Take by Stakeholders from Operative Phase
Installation Data: dd/mm/yyyy - Identification of the construction company
Unistallation Data: Number of removed brick and operations on them (e.g. n.1 removed brick and mortar elimination)
Date of last uninstallation in use, if applicable: dd/mm/yyyy - Identification of the construction company
Reason for last uninstallation in use, if applicable: (e.g. crack bridging of the block)
Data on the product use, when possible: (e.g. in walls)
Inspection Data, if any: (e.g. Visual inspection) - Identification of the construction company
Frequency of inspections Data: Periodic controls - Identification of the construction company
Information on faults: (e.g. cracking on n. of blocks) - Identification of the construction company
Maintenance Data, if any: (e.g. n. 1 Mending; n.1 Replacement) - Identification of the construction company
Data on Maintenance Frequency: 5 Years - Identification of the construction company
Quality of compatibility Data: Good compatibility with cement matrix
Give from Production Operators
Assembly, installation and connection instructions: - Place the gel disks in the prepared joints on the load-bearing panel and/or back of the new front liner. - Application of rabbit skin glue (optional, for added temporary adhesion) - Dissolve a small amount of glue in hot water according to the instructions provided. - Apply a thin amount of glue to the gel disks or surface of the front panel, taking care not to exceed to avoid spills. - Fixing new panel - Place the new front panel over the carrier panel, aligning the joints correctly. - Gently press along the entire surface to foster gel and glue adhesion. - Leave it for a few minutes until the bonding is completely stabilised. - Final check- Check that the panel is perfectly aligned and stable. - The panel can be removed or replaced again following the same procedure, thus ensuring continuous updatability without compromising the structure.
Drawings, diagrams and means of attachment to other products and parts of construction works: https://drive.google.com/file/d/17mcO2XdoZRj0YCXivow9dc5HUUvkmcVz/view?usp=sharing
Instructions for uninstallation: - Removing existing panel - Heat the surface of the panel slightly (for example with a low-power hairdryer) to soften the rabbit skin glue. - Gently lift the panel along the edges, peeling it off the gel pads. Reversible bonding allows removal without damaging the carrier panel. - Preparing joints for new panel - Clean any glue or gel residue left on the carrier panel
Description of adjustment and maintenance operations: Check the integrity of the door or its parts
Repair instructions: - For the cover, follow the entry: "Uninstallation instructions and Assembly, installation and connection instructions"; - For the base, follow the entry: "Instructions for uninstallation"; - Therefore, replace the base panel; - Continue according to the entry: "Assembly, installation and connection instructions"
Preventive maintenance measures to be observed: Humidity and Temperature: For wooden furniture, keep ambient humidity between 40% and 70% and temperatures between 10°C and 35°C to prevent crack formation. Resistance to Agents: The doors must not have water stagnation and require the use of neutral detergents for cleaning, avoiding aggressive products such as acetone and trichlorethylene.
Instructions for training installers or operators: N.A.
Disassembling Instruction for Mid-Life: - Removing existing panel: Heat the surface of the panel slightly (for example with a low-power hairdryer) to soften the rabbit skin glue. - Gently lift the panel along the edges, peeling it off the gel pads.
Instructions on methods of inspection: Visual inspections
Frequency of inspections: N.A.
Take by Stakeholders from Operative and Circularity Phase
Feedback on information clarity: All operations are listed
Give from Production Operators
Potential risks of the product: No one
Materials potential risks: No one
Any misuse reasonably foreseeable: No one
Secure storage: Away from heat sources and humid environments
Instructions for safe operation and maintenance: No one
Protective measures: No one
Information on what to do in the event of a breakdown or accident: N.A.
Training and other requirements that must be met for safe use: No specifications required
Personal protective equipment to be provided: Latex gloves
Instructions for training installers or operators: No specifications required
Take by Stakeholders from Operative and Circularity Phase
No data available.
Give from Production Operators
Repurpose Intructions: - Preparing joints for new panel - Clean any glue or gel residue left on the carrier panel. - Place the new gel pads supplied by the company in the joints set up on the load-bearing panel and/or on the back of the new front covering. - Application of rabbit skin glue (optional, for added temporary adhesion) - Dissolve a small amount of glue in hot water according to the instructions provided. - Apply a thin amount of glue to the gel disks or surface of the front panel, taking care not exceed it to avoid spills. - Fixing new panel - Place the new front panel over the carrier panel, aligning the joints correctly. - Gently press along the entire surface to foster gel and glue adhesion. - Leave to rest for a few minutes until the bonding is completely stabilised. - Final check - Check that the panel is perfectly aligned and stable. - The panel can be removed or replaced again following the same procedure, thus ensuring continuous updatability without compromising the structure.
Reuse Instructions: Ensure the absence of glue in the load-bearing panel
Recycle Instructions: Cover: send to dedicated PET treatment; Base: send to dedicated treatment Wood
Disassembling Instruction for End-Life: - Remove and delete opening devices; - Removing existing panel; - Heat the surface of the panel slightly (for example with a low-power hairdryer) to soften the rabbit skin glue; - Gently lift the panel along the edges, peeling it off the gel pads.
Take by Stakeholders from Operative Phase and Circularity Phase
Data on the quality of materials reuse: N.A.
Data on the quality of components reuse: N.A.
Data on the quality of material recovery from product components: N.A.
Product breakdown data for recovery: List the operations carried out (e.g. unistallation of n. of doors, according to the uninstallation recommendations, or n. of cover removal according to instructions)
Feedback on ease of Reuse: Excellent for the easy to change the external panel
Feedback on ease of recycling: Very good for ease of disassembly and separation for dedicated conferring
Secondary Generated Materials Data: N.A.
Give from Production Operators
Information on the performance of the product measured in terms of its climate change effects: Environmental essential characteristics table
Calculation of sustainability performance in relation to essential environmental characteristics and packaging used: N.A.
Environmental Footprint Data caused by production: N.A.
Prediction of Environmental Footprint Data caused by use: N.A.
Prediction of Environmental Footprint Data caused by Manutention: N.A.
Prediction of Environmental Footprint Data caused by transport: N.A.
Footprint caused by raw materials extraction: N.A.
Production Footprint: N.A.
Delivering Footprint: N.A.
Take by Stakeholders from Operative Phase and Circularity Phase
Data on circularity quality of materials and components: Excellent because it contains 75% to 100% of content of recycled materials and recovery of materials, including sustainable renewable materials
Consuption Data in use stage: N.A.
Consuption Data in the recycling phase: N.A.
Consuption Data in the reuse phase: N.A.
Consuption Data in the remanufacturing phase: N.A.
Consuption Data during reconditioning: N.A.
Give from Production Operators
No data available.
Take by Stakeholders from Operative Phase and Circularity Phase
Users and operators Feedback data on various sections of DPP: N.A.
Feedback on ease of cleaning: If laid wet, is difficult to clean it from mortar residues; if laid wet, it does not require cleaning
Feedback on ease of maintenance: Excellent for the ease to change damaged parts
Feedback on ease of disassembly: Is very easy to disassembly parts
Feedback on ease of repair: It is very simple because it does not require specialized labour, nor a lot of components
Give from Transport Operators
No data available.
Take by Production Operators
Data on compliance with the instructions for safe storage and transport: D.Lgs. 81/2008
Potential risks of product: No one
Reasonably foreseeable misuse: No one
Measures of protection: No one
Instructions to enable safe transport, take-over and delivery: Assured load appropriately
Instruction for training of transporters (if necessary): No one
Information on what to do in the event of a breakdown or accident: No one
Give from Transport Operators
Date of acceptance: N.A.
Data on delivery: N.A.
Transport data: Make and model of the truck
Data and date of change means: No one
Data on consumption during transport: Km travelled of the roundtrip
Data on the condition of the product during transport: No One
Take by Production Operators and Prosumers
No data available.
Give from Transport Operators
Feedback on instructions for safe storage and transport: It would be useful to inhibit the loading and unloading area to other users during the operations
Feedback on product packaging for travel: No one
Feedback on product take-over and delivery: No one
Take by Production Operators
No data available.
Give from Construction Workers
Information on the Construction Company: Name and contact details of the concerned company
Take by Production operators
Product identification CODE-TYPE and LOT/SERIES Number: BIOPICDoor
Product Description: Kitchen door
Contact details of the manufacturer: N.A.
Contact point details in the Member State where the product is available: N.A.
Give from Assembly Workers
No data available.
Take by Production Operators
Product Description: kitchen door
Manufacturer / Authorised Representative data: N.A.
Technical Evaluation Body: N.A.
Notified bodies / TAB (if applicable): N.A.
Validation Certificates References: N.A.
Technical Reference Documents: N.A.
Declared Performance: EU Declaration of conformity document
Product Requirements: UNI EN 1116:2018 for standard dimensions; Standard E1 (EN 717-1 / EN ISO 12460-3): Establishes the emission limits of formaldehyde from panels used for kitchen doors, setting a maximum level of 0.1 ppm
Evaluation and Verification System: No one for this product
Reference of standard: No one
Declarations on performance conformity, sustainability and requirements of the Product: EU Declaration of conformity document
Give from Assembly Workers
Date of last uninstallation: dd/mm/yyyy, if any, by listing the parts unistalledfor every part
Use Stage Data: Applied in a kitchen cabinet
Take by Production Operators
Products Category: N.A.
Declared uses: Kitchen door
Nominal size / classification: Classification of elements: base multilayer; reversible glue; interchangeable cover
Essential parts of the product: Base panel; glue; cover
Estimated average and minimum useful life: 20 Years
Possible variants and descriptions: Variants for the base: solid wood; chipboard; MDF;
Date and place of last uninstallation, if any: No
All necessary elements to demonstrate performance and compliance: EU Declaration of conformity document o No one?
Information on procedures to ensure that products meet the declared performance and compliance with the regulation: Internal quality controls and compliance procedures (E.g. Uni 9001 or other internal standardized certifications or production procedures to specify)
Information on assessment and verification systems: No one for this product
Conditions of use: Humidity and Temperature: For wooden furniture, keep ambient humidity between 40% and 70% and temperatures between 10°C and 35°C to prevent crack formation. Resistance to Agents: The doors must not have water stagnation and require the use of neutral detergents for cleaning, avoiding aggressive products such as acetone and trichlorethylene
Main materials used: Wood, PETG, water-based rabbit skin glue; gel disks
Compatibility with other materials or products: Metallic elements
Electrical and electromagnetic compatibility: N.A.
Software compatibility: N.A.
Integration into systems or kits: Yes, the whole product constitutes a kit
Give from Assembly Workers
Assembly, installation and connection: According to the instructions
Take by Production Operators
Assembly, installation and connection instructions: - Place the gel disks in the prepared joints on the load-bearing panel and/or back of the new front liner. - Application of rabbit skin glue (optional, for added temporary adhesion) - Dissolve a small amount of glue in hot water according to the instructions provided. - Apply a thin amount of glue to the gel disks or surface of the front panel, taking care not to exceed to avoid spills. - Fixing new panel - Place the new front panel over the carrier panel, aligning the joints correctly. - Gently press along the entire surface to foster gel and glue adhesion. - Leave it for a few minutes until the bonding is completely stabilised. - Final check- Check that the panel is perfectly aligned and stable. - The panel can be removed or replaced again following the same procedure, thus ensuring continuous updatability without compromising the structure.
Drawings, diagrams and means of attachment to other products and parts of construction works: https://drive.google.com/file/d/17mcO2XdoZRj0YCXivow9dc5HUUvkmcVz/view?usp=sharing
Instructions for uninstallation: - Removing existing panel - Heat the surface of the panel slightly (for example with a low-power hairdryer) to soften the rabbit skin glue. - Gently lift the panel along the edges, peeling it off the gel pads. Reversible bonding allows removal without damaging the carrier panel. - Preparing joints for new panel - Clean any glue or gel residue left on the carrier panel
Repair instructions: - For the cover, follow the entry: "Uninstallation instructions and Assembly, installation and connection instructions"; - For the base, follow the entry: "Instructions for uninstallation"; - Therefore, replace the base panel; - Continue according to the entry: "Assembly, installation and connection instructions"
Preventive maintenance measures to be observed: Humidity and Temperature: For wooden furniture, keep ambient humidity between 40% and 70% and temperatures between 10°C and 35°C to prevent crack formation. Resistance to Agents: The doors must not have water stagnation and require the use of neutral detergents for cleaning, avoiding aggressive products such as acetone and trichlorethylene.
Give from Assembly Workers
No data available.
Take by Production Operators
Potential risks of the product: No one
Instructions designed for safe use of the product: No one
Any misuse reasonably foreseeable: No one
Secure storage: Away from heat sources and humid environments
Instructions for safe operation and maintenance: No one
Protection measures during use: No one
Information on what to do in the event of a breakdown or accident: N.A.
Training and other requirements to be met for safe use: No specifications required
Instructions for training installers or operators: No specifications required
Instructions on protective measures for the user: No one
The personal protective equipment to be provided: Latex gloves
Give from Assembly Workers
Consumption data, if possible: N.A.
Environmental footprint feedback caused by use: N.A.
Information on product reuse/recycling: number of bases and covers subjected to operations according to recycling recommendations
Take by Production Operators
Information on theproduct performance measured in terms of its climate change effects: Environmental essential characteristics table
Secure storage: Away from heat sources and humid environments
Remanufacture Data: - Preparing joints for new panel - Clean any glue or gel residue left on the carrier panel. - Place the new gel pads supplied by the company in the joints set up on the load-bearing panel and/or on the back of the new front covering. - Application of rabbit skin glue (optional, for added temporary adhesion) - Dissolve a small amount of glue in hot water according to the instructions provided. - Apply a thin amount of glue to the gel disks or surface of the front panel, taking care not exceed it to avoid spills. - Fixing new panel - Place the new front panel over the carrier panel, aligning the joints correctly. - Gently press along the entire surface to foster gel and glue adhesion. - Leave to rest for a few minutes until the bonding is completely stabilised. - Final check - Check that the panel is perfectly aligned and stable. - The panel can be removed or replaced again following the same procedure, thus ensuring continuous updatability without compromising the structure
Reuse Data: Ensure the absence of glue in the load-bearing panel
Recycling Data: Crushing by manual or mechanical means
Environmental Footprint Data caused by raw materials extraction, production and delivery: N.A.
Consumption data, if possible: N.A.
Information on product recycling centres: no. of covers: treatment for PET; no. of bases: wood treatment
Rewards for good product recycling: At the discretion of the municipality
Further information on reuse and recycling: No one
Give from Assembly Workers
No data available.
Take by Transport Operators
Date of acceptance: N.A.
Data on delivery: N.A.
Data on consumption during transport: Make and model of the truck; Km travelled of the roundtrip
Give from Assembly Workers
User feedback on the various sections of the DPP: N.A.
Feedback oninformation clarity: All information is listed
Techical data feedback: All information and operations are listed
User feedback on circularity: The product respects the declared performance and is easy to disassembly and repurpose
Environmental footprint feedback: N.A.
Take by Production Operators and Circularity Operators
No data available.
Give from Manutentors and Specialized Operators
Information on the Maintenance Company: Name and contact details of the concerned company
Take by Production Operators
Product identification CODE-TYPE and LOT/SERIES Number: BIOPICDoor
Product Description: Kitchen door
Contact details of the manufacturer: N.A.
Contact point details in the Member State where the product is available: N.A.
Give from Manutentors and Specialized Operators
Type and frequency of inspections (carried out): Visual inspection
Type and frequency of maintenance (carried out): Anomalies founded by visual inspection
Repair data: dd/mm/yyyy, and e.g. number of bases and/or covers damaged repalced
Installation and uninstallation data: dd/mm/yyyy, and e.g. number of unistallation and new installation
Information on faults: e.g. type of damage and related parts
Date of last uninstallation: dd/mm/yyyy
Professional operators feedback: No one
Maintenance feedback: No one
Take by Production Operation
Products Category: N.A.
Declared Uses: Kitchen door
Nominal Size/Classification: Classification of elements: base multilayer; reversible glue; interchangeable cover
Essential Parts Of The Product: Base panel; glue; cover
Dimensions and shapes of components: Various dimensions; parallelepiped shape
Estimated Average And Minimum Useful Life: 20 Years
Possible Variants And Descriptions: Variants for the base: solid wood; chipboard; MDF;
Date And Place Of Last Uninstallation, If Any: No
Information on procedures to ensure that products meet the declared performance and compliance with the regulation: Internal quality controls and compliance procedures (E.g. Uni 9001 or other internal standardized certifications or production procedures to specify)
Intended users: Kitchen assemblers / non-specialized users
Conditions of use: Humidity and Temperature: For wooden furniture, keep ambient humidity between 40% and 70% and temperatures between 10°C and 35°C to prevent crack formation. Resistance to Agents: The doors must not have water stagnation and require the use of neutral detergents for cleaning, avoiding aggressive products such as acetone and trichlorethylene.
Main materials used: Wood, PETG, water-based rabbit skin glue; gel disks
Compatibility with other materials or products: Metallic elements
Electrical and electromagnetic compatibility: N.A.
Software compatibility: N.A.
Integration into systems or kits: Yes, the whole product constitutes a kit
Information on the frequency of inspections: N.A.
Information on the type of inspections: Visual inspections
Maintenance for safety and durability: Humidity and Temperature: For wooden furniture, keep ambient humidity between 40% and 70% and temperatures between 10°C and 35°C to prevent cracks. Resistance to agents: the doors must not have water stagnation and require the use of neutral detergents for cleaning, avoiding aggressive products such as acetone and trichlorethylene
Wear parts and replacement criteria: both parts are durable, each part can be replaced as instructed
Description of adjustment and maintenance operations: Verifying the integrity of the door or its parts
Give from Manutentors and Specialized Operators
Maintenance for durability reasons: As instructed
Take by Production Phase
Assembly, installation and connection instructions: - Place the gel disks in the prepared joints on the load-bearing panel and/or back of the new front liner. - Application of rabbit skin glue (optional, for added temporary adhesion) - Dissolve a small amount of glue in hot water according to the instructions provided. - Apply a thin amount of glue to the gel disks or surface of the front panel, taking care not to exceed to avoid spills. - Fixing new panel - Place the new front panel over the carrier panel, aligning the joints correctly. - Gently press along the entire surface to foster gel and glue adhesion. - Leave it for a few minutes until the bonding is completely stabilised. - Final check- Check that the panel is perfectly aligned and stable. - The panel can be removed or replaced again following the same procedure, thus ensuring continuous updatability without compromising the structure.
Drawings, diagrams and means of attachment to other products and parts of constructions: https://drive.google.com/file/d/17mcO2XdoZRj0YCXivow9dc5HUUvkmcVz/view?usp=sharing
Instructions for uninstallation: - Removing existing panel - Heat the surface of the panel slightly (for example with a low-power hairdryer) to soften the rabbit skin glue. - Gently lift the panel along the edges, peeling it off the gel pads. Reversible bonding allows removal without damaging the carrier panel. - Preparing joints for new panel - Clean any glue or gel residue left on the carrier panel
Description of adjustment and maintenance operations: Check the integrity of the door or its parts
Repair instructions: - For the cover, follow the entry: "Uninstallation instructions and Assembly, installation and connection instructions"; - For the base, follow the entry: "Instructions for uninstallation"; - Therefore, replace the base panel; - Continue according to the entry: "Assembly, installation and connection instructions"
Preventive maintenance measures to be observed: Humidity and Temperature: For wooden furniture, keep ambient humidity between 40% and 70% and temperatures between 10°C and 35°C to prevent crack formation. Resistance to Agents: The doors must not have water stagnation and require the use of neutral detergents for cleaning, avoiding aggressive products such as acetone and trichlorethylene.
Instructions of training for installers or operators: No specifications required
Disassembling Instruction for Mid-Life: Dry laying: manual dismount of every single brick
Instructions on methods of inspection: Visual inspections
Type of inspections that may occur more frequently: N.A.
Typical maintenance for durability reasons: N.A.
Frequency of inspections: N.A.
Give from Manutentors and Specialized Operators
Maintenance for safety reasons: No specifications required
Take by Production Operators
Potential risks of the product: No one
Materials potential risks: No one
Any misuse reasonably foreseeable: No one
Safe storage Instructions: Away from heat sources and humid environments
Instructions for safe operation and maintenance: No one
Protection measures: No one
Information on what to do in a breakdown or accident: N.A.
Training and other requirements that must be met for safe use.: No specifications required
The personal protective equipment to be provided: Latex gloves
Instructions for training installers or operators: No specifications required
Typical maintenance for safety reasons: No specifications required
Give from Manutentors and Specialized Operators
Environmental Footprint Data caused by Manutention: N.A.
Take by Production Operators
Prediction of Environmental Footprint Data caused by Manutention: N.A.
Give from Manutentors and Specialized Operators
Feedback from maintainers on the various sections of the DPP: N.A.
Feedback on the ease of cleaning, maintenance, disassembly, repair and reuse or recycling of the product and its components: Optimal, because is very easy to disassembly the parts, change and replace them. It's easy to divide it for correct recycle
Take by Production Operators and Circularity Operators
No data available.
Give from Circularity Operators
Information on operators and specialised disposal centres: Name and contact details of the concerned company
Take by Production Operators
Product identification CODE-TYPE and LOT/SERIES Number: BIOPIC
Product Description: Kitchen door
Contact details of the manufacturer: N.A.
Contact point details in the Member State where the product is available: N.A.
Give from Circularity Operators
No data available.
Take by Production Operators
Product Description: Kitchen door
Manufacturer / Authorised Representative data: N.A.
Technical Evaluation Body: N.A.
Notified bodies / TAB (if applicable): N.A.
Validation Certificates References: N.A.
Technical Reference Documents: N.A.
Declared Performance: EU Declaration of conformity document
Product Requirements: UNI EN 1116:2018 for standard dimensions; Standard E1 (EN 717-1 / EN ISO 12460-3): Establishes the emission limits of formaldehyde from panels used for kitchen doors, setting a maximum level of 0.1 ppm
Evaluation and Verification System: No one for this product
Reference of standard: No one
Declarations on performance conformity, sustainability and requirements of the Product: EU Declaration of conformity document
Give from Circularity Operators
Secondary generated material data (Data from recycling process): (E.g. No. of covers to treatment for PET; No. of bases to wood treatment base)
Data on circularity quality of materials and components: (E.g. Verify the absence of opening devices and glue residues from both components)
Techical Data (reuse, repurpose and recycle data): Operations carried out according to the instructions
Take by Product Operators and Operative Phase
Category of products: N.A.
Declared uses: Kitchen door
Nominal size / classification: Classification of elements: base multilayer; reversible glue; interchangeable cover
Essential parts of the product: Base panel; glue; cover
Estimated average and minimum useful life: 20 Years
Possible variants and descriptions: Variants for the base: solid wood; chipboard; MDF;
Date and place of last uninstallation, if any: dd/mm/yyyy
All elements to demonstrate performance and compliance: EU Declaration of conformity document
Information on procedures to ensure that products meet the declared performance and compliance with the regulation: Internal quality controls and compliance procedures (E.g. Uni 9001 or other internal standardized certifications or production procedures to specify)
Main materials used: Wood, PETG, water-based rabbit skin glue; gel disks
Primary raw materials: Primary raw material in possible variants for the base: solid wood, plywood
Secondary generated material data, if any (Data from the used product): N.A.
Chemical composition: For the base: solid wood, plywood, MDF, chipboard; rabbit skin water-based glue; disks: hydrogels consisting of collagen gelatin, food grade transglutaminase, glycerol and water; front finish: Polyethylene Terephthalate Glycolate (PETG)
Dimensions and shapes of components: Various dimensions; parallelepiped shape
Materials Risks: No one
Compatibility with other materials or products: Metallic elements
Electrical and electromagnetic compatibility: N.A.
Software compatibility: N.A.
Compatibility and integration in systems or kits: Yes, the whole product constitutes a kit
Give from Circularity Operators
Examples of product reuse/recycling: (E.g. Sent the parts to the dedicated conferring)
Take by Production Operators
Assembly, installation and connection instructions: - Place the gel disks in the prepared joints on the load-bearing panel and/or back of the new front liner. - Application of rabbit skin glue (optional, for added temporary adhesion) - Dissolve a small amount of glue in hot water according to the instructions provided. - Apply a thin amount of glue to the gel disks or surface of the front panel, taking care not to exceed to avoid spills. - Fixing new panel - Place the new front panel over the carrier panel, aligning the joints correctly. - Gently press along the entire surface to foster gel and glue adhesion. - Leave it for a few minutes until the bonding is completely stabilised. - Final check- Check that the panel is perfectly aligned and stable. - The panel can be removed or replaced again following the same procedure, thus ensuring continuous updatability without compromising the structure.
Instructions for disassembly: - Remove and delete opening devices; - Removing existing panel; - Heat the surface of the panel slightly (for example with a low-power hairdryer) to soften the rabbit skin glue; - Gently lift the panel along the edges, peeling it off the gel pads.
Drawings, diagrams and means of disassembly from other products and parts of construction works: https://drive.google.com/file/d/17mcO2XdoZRj0YCXivow9dc5HUUvkmcVz/view?usp=sharing
Measures of protection: No one
Training instructions for recycling operators: No specifications required
Information on what to do in the event of an accident: N.A.
Give from Circularity Operators
No data available.
Take by Production operators
Potential risks of the product: No one
Any misuse reasonably foreseeable: No one
Safe deposit box: Away from heat sources and humid environments
Instructions for safe operation and maintenance: No one
Protection measures: No one
Give from Circularity Operators
Information about incentives for recycling: At the discretion of the municipality
Remanufacture: N.A.
Reconditioning: N.A.
Reuse: (E.g. absence in the panels ensured)
Recycling: (E.g. No. of covers to treatment for PET; No. of bases to wood treatment base)
Take by Production Operators
Remanufacture: - Preparing joints for new panel - Clean any glue or gel residue left on the carrier panel. - Place the new gel pads supplied by the company in the joints set up on the load-bearing panel and/or on the back of the new front covering. - Application of rabbit skin glue (optional, for added temporary adhesion) - Dissolve a small amount of glue in hot water according to the instructions provided. - Apply a thin amount of glue to the gel disks or surface of the front panel, taking care not exceed it to avoid spills. - Fixing new panel - Place the new front panel over the carrier panel, aligning the joints correctly. - Gently press along the entire surface to foster gel and glue adhesion. - Leave to rest for a few minutes until the bonding is completely stabilised. - Final check - Check that the panel is perfectly aligned and stable. - The panel can be removed or replaced again following the same procedure, thus ensuring continuous updatability without compromising the structure
Reconditioning: N.A.
Reuse: Ensure the absence of glue in the load-bearing panel
Recycling: Cover: send to dedicated PET treatment; Base: send to dedicated treatment Wood
Give from Circularity Operators
Environmental Footprint data (caused by recycling process): N.A.
Take by Production operators
Information on the performance of the product measured in terms of its climate change effects: Environmental essential characteristics table
Calculation of sustainability performance in relation to essential environmental characteristics and packaging used: N.A.
Give from Circularity Operators
Circularity Operators feedback on the various sections of the DPP: N.A.
Disassembling End-Life data feedback: All operations are listed and clear
End life process data feedback: All information are clear
Reuse, repurpose and recycle Feedback: Ease of disassembly; Adequate for waste recycling as declared
Take by Operative phase
Environmental footprint data feedback from users: N.A.
Descrizione: Il pacchetto di BIOPIC – Kitchen door fornisce l’oggetto dimostrativo con integrazione DPP in ArchiCAD 28 e scambio IFC2x3. I Pset_DPP_ includono campi della fase operativa esposti come proprietà editabili e rimandi alle schede ufficiali del passaporto. La classificazione di prodotto “BIOPIC – Kitchen door” consente di propagare in modo coerente il profilo informativo alle istanze del modello.
Contenuti: PLN (ArchiCAD 28) – DPP_BIOPIC–Kitchen-door_AC-BIM.pln | TPL (ArchiCAD 28 Template) – DPP_BIOPIC–Kitchen-door_AC-BIM-Template.tpl | IFC (IFC2x3) – DPP_BIOPIC–Kitchen-door_AC-BIM.ifc
Requisiti: ArchiCAD 28 per PLN/TPL | viewer IFC compatibile per IFC2x3.
Template BIM/IFC: DPP_BIOPIC-–-Kitchen-door_BIMIFCTPL.zip